In this cross-studio class you will first have 4 weeks in the printmaking studio to learn the basics of carving into Lino to make a custom 9” x 12” print on paper.  You will achieve techniques that can be applied beyond this class and create a Lino block that you can print again.  

After completing your 9" × 12" print, you’ll build a custom hardwood frame in maple, cherry, or walnut to showcase it. Starting from rough lumber, you’ll mill stock to precise dimensions using the jointer, planer, table saw, and chop saw. You’ll cut accurate miters and assemble the frame with glued, splined joints in a contrasting wood species for added strength and a refined accent. Finally, we’ll apply an oil-based finish and install your print, so you leave with a professionally crafted frame ready to hang. All materials are provided.

All supplies and materials will be provided, but if you have extra elements you'd like to add, students are encouraged to bring them in. 

This class takes place in the print studio and wood shop at Groundworks Art Lab Main at 3750 Canfield Street Boulder 

Age 16+

**Schedule may shift, but it will be 4 weeks in each studio.

This class will be co-taught by Renate Mairie (print) and Tim Gordon (wood). 

Class meets weekly on Wednesdays. 

Students will NOT have access to open lab.

Will be available for registration Tuesday, May 26 at 8:00am

Learn to turn! This class will be an introduction to using the lathe - a machine used for shaping all manner of cylindrical forms (think bowls, vases,  furniture legs, even pens!). 

Over the course of four weeks, you will learn about the tools directly associated with the lathe and their primary uses. From practicing spindle turning to learning how to make bowls, we will learn the two major turning techniques that can be explored to no end with further practice.  This class will be as hands on as any class can, wasting no time before getting students turning with tool in hand (don’t worry, we’ll go over safety basics too). Beyond the basics we will practice, practice, practice. You will not want to turn your machines off!

This class has no prerequisites and is open to beginners and seasoned woodworkers alike, but our Wood Studio has some safety basics before anyone is allowed to join in the fun (failure to meet these requirements will result in not being granted access to the equipment): 

•  Please come dressed in close-toed shoes, a shirt that can be tucked in and either short sleeves, or sleeves that can be rolled up past your elbows. 
• No loose or dangling jewelry.
• If you have long hair, please have it securely tied back from your face.
• We will provide safety goggles and/or full face shields, ear protection, and face masks to cover nose and mouth, but if you have your own PPE you would prefer to use, please do!

Ages: 16+ 

All supplies and materials will be provided. 

These classes include open studio time.

Will be available to register on Tuesday, May 26 at 8:00am.

Immerse yourself in the world of woodworking by joining our comprehensive sampler class! This workshop is perfect for beginners who are looking to familiarize themselves with a woodshop, and who aim to become comfortable with the basics of milling and hand tools. 

This sampler class is designed to build your confidence and comfort with woodworking, laying a solid foundation for any advanced classes you may choose to pursue in the future. You’ll also have the chance to connect with other passionate woodworking enthusiasts, sharing ideas and experiences in a supportive and welcoming environment. 

This Class Does NOT include Open Lab

What to wear to the wood studio?  

Safety First: Long pants, and closed-toe, closed-heel shoes with socks that protect up to the ankle.  Shirts and tops should be easy to tuck in, with sleeves that can be rolled up as needed.  Tie back long hair to ensure safety.  We offer safety goggles, dust masks and ear protection, and they must be worn in the wood studio.  Feel free to bring your own if you are more comfortable with them.  Jewelry, loose-fitting clothing, or any other items that could dangle will need to be secured while using machines.

Safety Information:

• Closed-toe, closed-heel shoes
• Long pants
• Shirts should be easily tucked and sleeves pulled up
• Hair tied back
• Eye and lung protection are provided and must be worn in the studio

Ages: 16+ 

All supplies and materials will be provided. 

Sampler classes DO NOT include open studio time.

This is a Pay What You Can class with a suggested price of $280

Will be available to register on Tuesday, May 26 at 8:00am at 8:00am.

Curious how to use milling machinery– table saw, chop saw, jointer, and plainer? This beginner-level class will focus primarily on milling: the fundamental process of measuring, cutting, and preparing wood for a project. Over the course of 4 weeks, you'll learn how to safely use several of our milling machines to cut and shape wood, as well as some of the basics of joinery (joining pieces of wood together), and shaping and finishing with hand tools. We'll walk you through the whole process of creating a simple but beautiful functional piece that you'll want to brag to all your friends about.

This class has no prerequisites and is open to beginners and seasoned woodworkers alike, but our Wood Studio has some safety basics before anyone is allowed to join in the fun (failure to meet these requirements will result in not being granted access to the equipment): 

•  Please come dressed in close-toed shoes, a shirt that can be tucked in and either short sleeves, or sleeves that can be rolled up past your elbows. 
• No loose or dangling jewelry.
• If you have long hair, please have it securely tied back from your face.
• We will provide safety goggles and/or full face shields, ear protection, and face masks to cover nose and mouth, but if you have your own PPE you would prefer to use, please do!

Ages: 16+ 

All supplies and materials will be provided. 

These classes include open studio time.

Will be available to register on Tuesday, May 26 at 8:00am at 8:00am.

Learn to turn! This class will be an introduction to using the lathe - a machine used for shaping all manner of cylindrical forms (think bowls, vases,  furniture legs, even pens!). 

Over the course of four weeks, you will learn about the tools directly associated with the lathe and their primary uses. From practicing spindle turning to learning how to make bowls, we will learn the two major turning techniques that can be explored to no end with further practice.  This class will be as hands on as any class can, wasting no time before getting students turning with tool in hand (don’t worry, we’ll go over safety basics too). Beyond the basics we will practice, practice, practice. You will not want to turn your machines off!

This class has no prerequisites and is open to beginners and seasoned woodworkers alike, but our Wood Studio has some safety basics before anyone is allowed to join in the fun (failure to meet these requirements will result in not being granted access to the equipment): 

•  Please come dressed in close-toed shoes, a shirt that can be tucked in and either short sleeves, or sleeves that can be rolled up past your elbows. 
• No loose or dangling jewelry.
• If you have long hair, please have it securely tied back from your face.
• We will provide safety goggles and/or full face shields, ear protection, and face masks to cover nose and mouth, but if you have your own PPE you would prefer to use, please do!

Ages: 16+ 

All supplies and materials will be provided. 

These classes include open studio time.

Will be available to register on Tuesday, May 26 at 8:00am.

Immerse yourself in the world of woodworking by joining our comprehensive sampler class! This workshop is perfect for beginners who are looking to familiarize themselves with a woodshop, and who aim to become comfortable with the basics of milling and hand tools. 

This sampler class is designed to build your confidence and comfort with woodworking, laying a solid foundation for any advanced classes you may choose to pursue in the future. You’ll also have the chance to connect with other passionate woodworking enthusiasts, sharing ideas and experiences in a supportive and welcoming environment. 

This Class Does NOT include Open Lab

What to wear to the wood studio?  

Safety First: Long pants, and closed-toe, closed-heel shoes with socks that protect up to the ankle.  Shirts and tops should be easy to tuck in, with sleeves that can be rolled up as needed.  Tie back long hair to ensure safety.  We offer safety goggles, dust masks and ear protection, and they must be worn in the wood studio.  Feel free to bring your own if you are more comfortable with them.  Jewelry, loose-fitting clothing, or any other items that could dangle will need to be secured while using machines.

Safety Information:

• Closed-toe, closed-heel shoes
• Long pants
• Shirts should be easily tucked and sleeves pulled up
• Hair tied back
• Eye and lung protection are provided and must be worn in the studio

Ages: 16+ 

All supplies and materials will be provided. 

Sampler classes DO NOT include open studio time.

This is a Pay What You Can class with a suggested price of $280

Will be available to register on Tuesday, May 26 at 8:00am at 8:00am.

Big spoon or little spoon? You don't have to pick in our very first 5-studio crossover class: Exploring Through Spoons!

In this Adult Summer Camp, you'll get a lightning fast introduction to our Clay, Glass, Wood, Metal, and Print studios. Each week, the students will be in a different studio learning the material through the ancient practice of spoon (or spoon related object) making (seriously, spoons are, like, 3,000 years old)! The schedule will be as follows:

Day 1 Clay -  Students will be in the clay studio making hand-built spoon crocks
Day 2 Glass - Students will be in the glass studio making fused spoon rest
Day 3 Wood - Students will be in wood studio learning how to carve a spoon
Day 4 Metal - Students will be in the metal studio learning how to forge a ladle
Day 5 Print - Students will be in the print studio learning linocut to make a 1 of a kind spoon-related print culminating in a display of craftsmanship for the ages.

Ages: 16+

This class will be co-taught by an expert in each studio. Clay (Codey Davis), Glass (Laura Beth Konopinski), Wood (Dennis Mulherin), Metal (James Makely), and Print (Akane Kleinkopf).

This class takes place at Groundworks Main at 3750 Canfield St.

This class does NOT include extra open lab time. All work must be completed during class time.