New to glasswork and don’t know where to start? You’re in the right place! Our Glass Studio Sampler class is the perfect place to begin your journey of learning and understanding the material and techniques of making beautiful art with glass.

This class will spend four weeks going over low-fire glassworking techniques like kiln fusing, sheet glass cutting and coldwork (working with unheated glass), and hot glass / hot sculpting (reshaping heated glass with either torches or kilns). The projects will be simple and may vary depending on the material and technique being covered that week.

This class has no prerequisites and is specifically set up for absolute beginners to this art form. Our Glass Studio does have some safety basics before anyone is allowed to join in the fun (failure to meet these requirements will result in not being granted access to the equipment): 

• Please come dressed in close-toe and heel shoes, and natural material clothing, i.e. cotton or linen, long pants are recommended. 
• No loose or dangling jewelry, long earrings or scarves.
• If you have long hair, please have it securely tied back from your face.
• We will provide safety goggles, but if you have your own and would like to bring them, please do!

Ages: 16+ 

All supplies and materials will be provided. 

Will be available to register on Monday, Decemeber 8 at 8:00am.

In this class, students will learn about the basics and varieties of intaglio printmaking, a process in which ink is pushed into the recesses of a plate and wiped away from the surface before printing, which allows for interesting textures, fine lines, and a high degree of detail. This class will cover drypoint, collagraph, Tetrapak printmaking, and copper etching techniques, and students will learn how to create compelling prints from start to finish.

This class is 8 weeks and comes with Open Lab.

This is a level 2 class, students are recommended to have some level of printmaking experience to participate.

Ages: 16+ 

All supplies and materials will be provided. 

Will be available to register on Monday, December 8 at 8:00am.

Please join us for the Wonderful World of Raku! A class specializing in Handbuilding and Raku techniques from different parts of the world. We will be doing firings based on Japanese, Western (Horsehair/Natural) and Eastern European (Obvara) reduction firing techniques. You can't miss this!

Class does NOT include additional open lab time or clay. All work must be completed during class time.  

Ages 16+ to register

Class meets weekly on THURSDAYS

Willl be available to register on Monday, December 8 at 8:00am.

If you have wondered what the craft of blacksmithing is like to practice, this class is for you. Experience the joy of forging steel into objects of utility and beauty. This beginning level class will cover shop safety, fire management, tools and equipment, and appropriate use of the anvil, as well as an introduction to object-making using multiple methods of shaping hot metals. Students will develop crucial skills for more advanced blacksmithing projects.

This class has no prerequisites and is specifically set up for absolute beginners to this art form. Our Metal Studio does have some safety basics before anyone is allowed to join in the fun (failure to meet these requirements will result in not being granted access to the equipment): 

• Please come dressed in close-toe and heel shoes, and natural material clothing, i.e. cotton or linen, long pants are recommended. 

• For welding, you must wear a shirt with long sleeves that fully covers your chest. We recommend a long sleeved button down.

• No loose or dangling jewelry, long earrings or scarves.

• If you have long hair, please have it securely tied back from your face.

• We will provide safety goggles and other PPE, but if you have your own and would like to bring them, please do!

Ages: 16+ 

All supplies and materials will be provided. 

Will be available to register on Monday, December 8 at 8:00am.

Learn to turn! This class will be an introduction to using the lathe - a machine used for shaping all manner of cylindrical forms (think bowls, vases,  furniture legs, even pens!). 

Over the course of four weeks, you will learn about the tools directly associated with the lathe and their primary uses. From practicing spindle turning to learning how to make bowls, we will learn the two major turning techniques that can be explored to no end with further practice.  This class will be as hands on as any class can, wasting no time before getting students turning with tool in hand (don’t worry, we’ll go over safety basics too). Beyond the basics we will practice, practice, practice. You will not want to turn your machines off!

This class has no prerequisites and is open to beginners and seasoned woodworkers alike, but our Wood Studio has some safety basics before anyone is allowed to join in the fun (failure to meet these requirements will result in not being granted access to the equipment): 

•  Please come dressed in close-toed shoes, a shirt that can be tucked in and either short sleeves, or sleeves that can be rolled up past your elbows. 
• No loose or dangling jewelry.
• If you have long hair, please have it securely tied back from your face.
• We will provide safety goggles and/or full face shields, ear protection, and face masks to cover nose and mouth, but if you have your own PPE you would prefer to use, please do!

Ages: 16+ 

All supplies and materials will be provided. 

Will be available to register on Monday, December 8 at 8:00am.

For students that have never touched clay to those still learning the basics.

This class will cover the basic “how tos” of pottery. Students will learn the foundations of throwing, including how to confidently center, pull, and trim pots on the wheel. The class will also cover basic glazing techniques, attaching handles, and how to track your pieces through the studio.

Ages: 16 and above

Class meets weekly on THURSDAYS

Note: This class will meet at the HILL location at 1010 Aurora Ave. You will only have open lab access at the same studio as your class.

Does NOT include Firing Fees. For details on our Firing Fees, please click here: https://www.groundworksartlab.org/firing-fees

All pieces will be fired to Cone 6 in a reduction kiln.

Will be available to register on Monday, December 8 at 8:00am.

This class is great for students who already have some experience with clay and are looking to take the next step.

The demonstrations for this class go beyond the basics. Students will learn how to make more complex forms and techniques including: altered forms, lidded jars, throwing off-the-hump, sgraffito, and more.

(Please check the class prerequisites before enrolling)

Ages: 16+

Class meets weekly on THURSDAYS

Note: This class will meet at the MAIN location at 3750 Canfield St. You will only have open lab aaccess at the same studio as your class.

Will be available to register Monday, December 8 at 8:00am.

Level I Hand-building for students wanting to explore the basic techniques for hand-building functional, sculptural, or decorative pieces.

Learn about the various hand-building tools, and the three basic hand-building techniques: pinching, coiling, and slab rolling through a series of self-guided projects.

Ages: 16+

Class meets weekly on FRIDAYS for 8 weeks

Note: This class will meet at the new Main location at 3750 Canfield Street in NE Boulder. You will only have open lab access at the same studio as your class. 

Does NOT include Firing Fees. For details on our Firing Fees, please click here: https://www.groundworksartlab.org/firing-fees

All pieces will be fired to Cone 6 in a reduction kiln.

This class is Pay What You Can with a suggested price of $285

Will be available to register on Monday, December 8 at 8:00am.